EcoSmart uses less water than conventional hansgrohe products without this technology. The integrated flow limiter reduces the amount of water that flows through the products. This in turn reduces the amount of energy needed to heat water as less hot water is required. Depending on individual usage conditions, this also makes it possible to reduce energy bills.
EcoSmart technology is integrated into the interior of your hansgrohe shower and/or tap, where it reduces the amount of water used by limiting the flow. If less hot water flows through your shower/tap, you also need less energy. The lower level of energy consumption also makes it possible to reduce CO2 emissions. But don’t worry, you can still enjoy water to the full: the technology supports the efficient use of water and combines this with the enjoyable experiences of water that you would expect from hansgrohe products.
Thanks to the integrated flow limiter in overhead and hand showers with EcoSmart technology, you only use 8 litres of water per minute. In showers with EcoSmart+ technology, the water consumption falls even further to 6 litres or less per minute (at 3 bar). This equates to an up to 40% reduction compared to hansgrohe showers without water-saving technology (the standard flow is around 15 litres per minute at 3 bar) or as much as 60% with EcoSmart+.
Use a mere 5 litres of water per minute with EcoSmart taps or as little as 4 litres per minute with EcoSmart+ taps. This saving is again achieved thanks to the integrated flow limiter. If hansgrohe taps are also fitted with CoolStart technology, you can furthermore reduce the amount of energy used to heat water. This is because only cold water runs if the tap lever is in the middle position; hot water will only run if the lever is turned to the left.
Whether to invigorate or relax us, showering is one of our most cherished routines. But have you ever wondered how much water you use? The water savings calculator is an online tool that shows you how much water and energy you can save by using hansgrohe EcoSmart showers.
hansgrohe EcoSmart reduces your daily water consumption at the wash basin by up to 60% compared to our products without this technology. If you multiply this reduction by the number of basin taps in your home, you’ll quickly see how much water you can save with EcoSmart technology. The use of less hot water can furthermore reduce your energy requirements and the associated energy costs.
EcoSmart reduces the water consumption of all hansgrohe basin taps to around 5 litres per minute (at 3 bar). EcoSmart+ products use even less: just 4 litres per minute. This is all thanks to special flow limitation. What’s more, despite the reduction in water flow, you can still enjoy a plump, bubbling water spray thanks to the targeted spray formation and air-enriched water.